Free · Online

DR.Luftkissenbahn

Explore collisions, momentum transfer and energy conversion with two gliders.

Use at your own risk. No warranty of any kind.

Physics
EXPERIMENT OBSERVE UNDERSTAND

Air track

100 % no sliding or static friction
ReadyLuftkissen aktiv · reibungsfrei
Your browser does not support Canvas. Measurements and charts are available below.
Spring buffersPositive direction +x →
No momentum flow between the gliders

Drag faster for more momentum. Hold still briefly before releasing to set the glider down.

TIME0,00s

Ready for the experiment.

AGlider A momentum

0,000Hy

vA = 0,00 m/s
BGlider B momentum

0,000Hy

vB = 0,00 m/s
ΣTotal momentum

0,000Hy

Gliders + environment + hand

Momentum over time

1 Messpunkt
Impuls-Zeit-Diagramm

The total balance includes both gliders, the surrounding air and Earth, and the opposite momentum of the hand.

Snapshot

Simulation paused

Wheel or two fingers: zoom · Drag: pan · Tap/click: measurement

Setup

Choose the experiment, gliders and environment.

Choose an experiment

Choose your own setup or a prepared experiment.

Schritt 1 von 3

Help

An overview of controls, the model and export.

Setup

“Setup” guides you through the experiment, gliders and environment in three steps. Only “Prepare experiment” applies the setup and starts a new measurement. The red triangles on the gliders mark their centres on the black-and-white scale along the track.

Free setup lets you choose masses, initial positions, initial velocities and buffers. Three presets provide an elastic collision, an inelastic collision and a spring launch. You can click the zero mark below each velocity slider. The mass sliders in the workspace take effect immediately, during motion or while paused: position and time remain unchanged, and velocity adjusts while momentum is conserved. If the gliders are already joined, their combined momentum is conserved and they continue moving together. Changing initial values or buffers, or applying a configuration through “Setup”, still starts a new measurement.

Expert mode: spring constants

Expert mode lets you adjust the contact spring between the gliders and the left and right end springs independently: 1 to 1,000 N/m each, with a default of 100 N/m. The contact constant describes the entire spring contact and also applies to the spring launch. Press Enter or leave the field to apply the value. Position, momentum, measurement time and existing samples are preserved. Changing a compressed spring records the energy change as work from spring changes. Inactive end springs retain their value. Switching expert mode off restores 100 N/m for all three springs, without restarting the measurement; the energy change is still accounted for. A new measurement through Setup or Reset retains the currently selected spring constants.

Move gliders with the mouse

Grab a glider directly on the track. A limited hand force accelerates or brakes it towards the pointer. Mouse velocity immediately before release sets the release velocity (up to ±2 m/s). Dragging faster transfers more momentum. Hold the pointer still briefly before release to set the glider down. Time runs at 1× while dragging. The glider is not teleported and cannot pass through the other glider. You can also move a connected pair. Escape or switching windows releases the grip and pauses.

Fullscreen, springs and sound

Fullscreen enlarges the workspace as in DR.Spektrum. Controls and measurements remain accessible. The second fullscreen icon, with two sections, shows only the track and chart. Start, pause and chart selection remain visible. The four-corner fullscreen icon returns to the complete workspace. Use the same button or Escape to leave fullscreen. If native fullscreen is unavailable, the workspace fills the window. Left and right end springs can be enabled independently. Changing them starts a new measurement. The springs store and return energy without loss.

The speaker icon enables blower noise, short collision sounds, a metallic clang at an end stop without a spring, and a gentle squeak as springs compress and relax. Compression sounds slightly higher, relaxation softer and lower. Sound is generated locally and can be muted at any time. It does not remove energy from the idealised model.

Arrange modules

On large screens, drag modules by their dotted handles. Use Space or Enter to pick up a focused handle, the arrow keys to choose a position, and Enter to drop it. Escape cancels the move. Your layout is saved on your device. “Reset layout” restores the default arrangement.

Energy and external interaction

The hand is an external drive. Its work can be positive (adding energy) or negative (removing energy). Changing mass at constant momentum also changes kinetic energy. This energy change is recorded separately as signed work from mass changes; it does not produce additional internal energy. Changing the stiffness of a compressed spring adds or removes energy, recorded as work from spring changes. The energy balance is Ekin + Espring + Einternal = Einitial + Whand + Wmass + Wspring change. The initial energy stays unchanged throughout the measurement. Internal energy includes conversion through friction, sticking and end stops. The momentum balance also includes the opposite momentum transferred to the hand. The idealised Earth is so massive that its kinetic energy is neglected.

Look more closely

Use Pause and 0.1× speed to examine a collision. Space starts or pauses, → advances one step, and R resets. Form controls retain their own keyboard functions.

Choose 30 s, 60 s or unlimited recording; the default is unlimited. At the selected time limit, the experiment pauses. Select a longer duration and Continue to resume. Reset starts a new measurement. The latest collision information and its time remain visible until the next collision or reset.

Momentum and momentum flow

The positive direction is to the right. Negative momentum corresponds to motion to the left. The name Huygens (Hy) follows the supplied handout: 1 Hy = 1 kg·m/s = 1 N·s. The momentum flow rate into a glider is its resultant force, measured in N. Momentum arrows share a scale that adjusts when additional energy is supplied. Read the numerical displays for precise values.

Physics background

The physics background explains the forces, numerical methods and balances in the simulation.

Model assumptions

The horizontal track is 2.40 m long. Air cushion strength ranges from 0 to 100%. Surface friction remains at lower settings and disappears at 100%. The simplified model makes the remaining normal force proportional to one minus the air cushion strength; it does not model a particular blower characteristic. Air resistance is switched separately and also acts when the blower is on. It opposes motion according to F = −c · |v| · v, with c = 0.02 kg/m per glider. Switching it does not restart the experiment. Energy lost is accounted for as internal energy, and opposite momentum is assigned to the environment. Air and Earth form a shared environment. The glider buffer is modelled as a linear spring. In a sticking collision, relative motion ends at maximum compression and the gliders remain connected. In a spring launch, a preloaded spring is released. Its stored energy sets the gliders in motion. In the force chart, t = 0 means the instant just after release.

Below 100% air cushion strength, sliding friction slows the gliders. Their lost momentum is assigned to the Earth. An absorbing end stop also transfers momentum to the Earth and stops the affected glider. Another glider that is still moving continues. You can push stationary gliders again with the mouse.

The force chart shows the resultant forces on the gliders, including hand and friction forces. Very short hard impacts and the final hand impulse at release are instantaneous momentum changes with no resolved force-time curve. The release impulse and its work are fully included in the balances. A → B denotes the contact momentum flow in the positive x direction.

Take measurements with you

The chart and CSV use measurements from the last 60 simulated seconds. The CSV contains time, masses, positions, velocities, momenta, forces, work by the hand, work from mass and spring changes, the three spring constants, and momentum and energy balances. Older values are discarded, so export any measurements you want to keep in time. Data stays on your device. No external services are loaded. The CSV retains its German column names and decimal-comma format in both languages.

Physics background

An explanation of forces, motion, momentum and energy.